Please note: This vignette will be updated from time to time when new features are implemented. Please find the most recent version at the QurvE GitHub repository.
Introduction
In virtually all disciplines of biology dealing with living
organisms, from classical microbiology to applied biotechnology, it is
routine to characterize the growth of the species under
study. QurvE
provides a suite of analysis tools to make
such growth profiling quick, efficient, and reproducible. In addition,
it allows the characterization of fluorescence data
for, e.g., biosensor characterization in plate reader experiments
(further discussed in the vignette Quantitiative Fluorescence Curve
Evaluation with Package QurvE
). All computational
steps to obtain an indepth characterization are combined into
userfriendly workflow functions and a range of plotting
functions allow the visualization of fits and the comparison of organism
performances.
Any physiological parameter calculated (e.g., growth rate µ, doubling time t_{D}, lag time \(\lambda\), growth measurement increase \(\Delta\)Y, or equivalent fluorescence parameters) can be used to perform a doseresponse analysis to determine the halfmaximal effective concentration (EC_{50}).
The package is build on the foundation of the two R packages from
Kahm et al. (2010) and Petzoldt (2022).
QurvE
was designed to be usable with minimal prior
knowledge of the R programming language or programming in general. You
will need to be familiar with the idea of running commands from a
console or writing basic scripts. For R beginners, this is
a great starting point, there are some good resources here and we
suggest using the RStudio
application. It provides an environment for writing and running R
code.
With consideration for R
novices, QurvE
establishes a framework in which a complete, detailed growth curve
analysis can be performed in two simple steps:
Read data in custom or tidy format, or parse data from a plate reader experiment.
Run workflow, including fitting of growth curves, doseresponse analysis, and rendering a report that summarizes the results.
All computational results of a workflow are stored in a data
container (list) and can be visualized by passing them to the generic
function plot(list_object)
. QurvE
further
extends the user’s control over the fits by defining thresholds and
quality criteria, allows the direct parsing of data from plate reader
result files, and calculates parameters for an additional growth phase
(biphasic growth).
Installation
Shiny app
QurvE features a graphical user interface (GUI) developed as a Shiny app, which has been designed to be userfriendly and intuitive. You can start the app by running:
See the QurvE User Manual for details on how to use the frontend application.
Growth profiling methods
Three methods are available to characterize growth curves:
Fit parametric growth models to (logtransformed) growth data
Determine maximum growth rates (µ_{max}) from the loglinear part of a growth curve using a heuristic approach proposed as the “growth rates made easy”method by Hall et al. (2014). Do do so,
QurvE
uses code from the package Petzoldt (2022), but adds userdefined thresholds for (i) R^{2} values of linear fits, (ii) relative standard deviations (RSD) of estimates slopes, and (iii) the minimum fraction of total growth value increase (\(\Delta\)Y) a regression window should cover to be considered for the analysis. These thresholds ensure a more robust and reproducible identification of the linear range that best describes the growth curve. Additionally, parameters for a secondary growth phase can be extracted for bilinear growth curves.^{1}
The algorithm works as follows:Fit linear regressions [with the TheilSen estimator (Sen, 1968; Theil, 1992)] to all subsets of
h
consecutive, logtransformed data points (sliding window of sizeh
). If, for example,h=5
, fit a linear regression to points 1 \(\dots\) 5, 2 \(\dots\) 6, 3 \(\dots\) 7 and so forth.Find the subset with the highest slope \(\mu_{max}\). Do the R^{2} and RSD values of the regression meet the defined thresholds and do the data points within the regression window account for at least a defined fraction of the total growth measurement increase? If not, evaluate the regression with the second highest slope, and so forth.
Include also the data points of adjacent subsets that have a slope of at least a \(defined \space quota \times \mu_{max}\), e.g., all regression windows that have at least 95% of the maximum slope.
Fit a new linear model to the extended data window identified in step iii.
If
biphasic = TRUE
(see section @ref(runworkflow)), the following steps are performed to define a second growth phase:Perform a smooth spline fit on the data with a smoothing factor of 0.5.
Calculate the second derivative of the spline fit and perform a smooth spline fit of the derivative with a smoothing factor of 0.4.
Determine local maxima and minima in the second derivative.
Find the local minimum following \(\mu_{max}\) and repeat the heuristic linear method for later time values.
Find the local maximum before \(\mu_{max}\) and repeat the heuristic linear method for earlier time values.
Choose the greater of the two independently determined slopes as \(\mu_{max}2\).
Perform a smooth spline fit on (logtransformed) growth data and extract µ_{max} as the maximum value of the first derivative^{1}.
If
biphasic = TRUE
(see section @ref(runworkflow)), the following steps are performed to define a second growth phase:Determine local minima within the first derivative of the smooth spline fit.
Remove the ‘peak’ containing the highest value of the first derivative (i.e., \(\mu_{max}\)) that is flanked by two local minima.
Repeat the smooth spline fit and identification of maximum slope for later time values than the local minimum after \(\mu_{max}\).
Repeat the smooth spline fit and identification of maximum slope for earlier time values than the local minimum before \(\mu_{max}\).
Choose the greater of the two independently determined slopes as \(\mu_{max}2\).
Doseresponse analysis methods
The purpose of a doseresponse analysis is to define the
sensitivity of a given organism to the effects of a compound or
the potency of a substance, respectively. Such effects can be
either beneficial (e.g., a nutrient compound) or detrimental (e.g., an
antibiotic). The sensitivity is reflected in the halfmaximal effective
concentration (EC_{50}), i.e., the concentration (dose)
at which the halfmaximal response (e.g., \(\mu_{max}\) or \(\Delta\)Y) is observed. QurvE
provides two methods to determine the EC_{50}:
Perform a smooth spline fit on response vs. concentration data and extract the EC_{50} as the concentration at the midpoint between the largest and smallest response value.
Apply up to 20 (parametric) doseresponse models to response vs. concentration data and choose the best model based on the Akaike information criterion (AIC). This is done using the excellent package
drc
(Ritz et al., 2016).
Data formats
QurvE
accepts files with the formats .xls,
.xlsx, .csv, .tsv, and .txt (tab
separated). The data in the files should be structured as shown in
Figure @ref(fig:datalayout) or in ‘tidy’ format with columns ‘Time’,
‘Description’, and ‘Values’ (plus optional: ‘Replicate’ and
‘Concentration’). Alternatively, data parsers are available that allow
direct import of raw data from different culture instruments. For a list
of currently supported devices, please run ?parse_data
.
Please note: I recommend always converting .xls or .xlsx files to an alternate format first to speed up the parsing process. Reading Excel files may require orders of magnitude longer processing time.
Custom format
To ensure compatibility with any type of measurement and data type
(e.g., optical density, cell count, measured dimensions),
QurvE
uses a custom data layout. Here the first column
contains time values and ‘Time’ in the top
cell, cells #2 and #3 are ignored. The remaining columns contain
measurement values and the following sample identifiers in the
top three rows:
 Sample name; usually a combination of organism and condition, or ‘blank’.
 Replicate number; replicates are identified by identical names and concentration values. If only one type of replicate (biological or technical) was performed, enter numerical values here. If both biological and technical replicates of these biological replicates have been performed, the technical replicates should have the same replicate number. The technical replicates are then combined by their average value.
 (optional) Concentration values of an added compound; this information is used to perform a doseresponse analysis.
Several experiments (e.g., runs on different plate readers) can be
combined into a single file and analyzed simultaneously. Therefore,
different experiments are marked by the presence of separate time
columns. Different lengths and values in these time columns are
permitted.
To read data in custom format, run:
grodata < read_data(data.growth = 'path_to_data_file',
csvsep = ';', # or ','
dec = '.', # or ','
sheet.growth = 1, # number (or "name") of the EXCEL file sheet containing data
subtract.blank = TRUE,
calib.growth = NULL)
The data.growth
argument takes the path to the file or the name of an R dataframe object
containing experimental data in custom format. csvsep
specifies the separator
symbol (only required for .csv files; default: ';'
). dec
is the decimal separator
(only required for .csv, .tsv, or .txt files; default:
'.'
). If an Excel file format is used, sheet.growth
specifies the
number or name (in quotes) of the sheet containing the data.
If subtract.blank = TRUE
,
columns with name ‘blank’ will be combined by their rowwise average,
and the mean values will be subtracted from the measurements of all
remaining samples. For the calib.growth
argument, a formula
can be provided in the form ‘y = function(x)’ (e.g.,
calib.growth = 'y = x * 2 + 0.5'
) to transform growth
measurement values.
Tidy format
The QurvE
package is designed to be flexible and
userfriendly, and it is fully compatible with data in ‘tidy’ format.
This format, also known as ‘long’ format, is a standard way of
organizing data that suits many types of analyses and visualizations in
R.
In tidy format, each row is an observation and each column is a
variable. In the context of QurvE
, your data should include
the following columns:
“Time”: This column should contain the time values for your observations.
“Description”: This column should contain a description of the sample. This could be a combination of organism and condition or any other relevant descriptor.
“Values”: This column should contain the measurement values for your experiment (e.g., optical density, cell count, etc.).
“Replicate” (optional): If you have multiple replicate measurements for the same condition (“Description” labels), you can indicate the replicate number in this column.
“Concentration” (optional): If there’s a compound of interest added to the sample, you can record its concentration in this column.
To load your tidy format data into QurvE
, use the
read_data
function in the following way:
grodata < read_data(data.growth = 'path_to_tidy_data_file',
csvsep = ';', # or ','
dec = '.', # or ','
sheet.growth = 1, # number (or "name") of the EXCEL file sheet containing data
subtract.blank = TRUE,
calib.growth = NULL)
This code block works the same way as for the custom format described
above; QurvE
detects automatically if data is in tidy
format. Be sure to replace 'path_to_tidy_data_file'
with
the path to your own data file.
Note: Always ensure your data meets the tidy data standard. This
means that every variable has its own column, every observation has its
own row, and every value has its own cell. Additionally, make sure that
your column headers exactly match those specified above, as
QurvE
will look for these specific headers when processing
your data.
Data parser
The data generated by culture devices (e.g., plate readers) from
different manufacturers come in different formats. If these data are to
be used directly, they must first be “parsed” from the plate reader into
the QurvE
standard format. In this scenario, sample
information must be provided in a separate table that maps
samples with their respective identifiers.The mapping table
must have the following layout (Figure @ref(fig:mappinglayout)):
To parse data, run:
grodata < parse_data(data.file = 'path_to_data_file',
map.file = 'path_to_mapping_file',
software = 'used_software_or_device',
csvsep.data = ';', # or ','
dec.data = '.', # or ','
csvsep.map = ';', # or ','
dec.map = '.', # or ','
sheet.data = 1, # number (or "name") of the EXCEL file sheet containing data
sheet.map = 1, # number (or "name") of the EXCEL file sheet containing
# mapping information
subtract.blank = TRUE,
calib.growth = NULL,
convert.time = NULL)
The data.file
argument
takes the path to the file containing experimental data exported from a
culture device, map.file
the path to the file with mapping information. With software
, you can specify the
device (or software) that was used to generate the data. csvsep.data
and csvsep.map
specify the separator
symbol for data and mapping file, respectively (only required for .csv
files; default: ';'
). dec.data
and dec.map
are the decimal
separator used in data and mapping file, respectively (only required for
.csv, .tsv, or .txt files; default: '.'
). If an Excel file
format is used for both or one of data or mapping file, sheet.data
and/or sheet.map
specify the number or
name (in quotes) of the sheet containing the data or mapping
information, respectively. If the same Excel file contains both data and
mapping information in different worksheets, the file path needs to be
specified for both data.file
and map.file
. If
subtract.blank = TRUE
,
samples with name ‘blank’ will be combined by their rowwise average,
and the mean values will be subtracted from the measurements of all
remaining samples. The argument convert.time
accepts a function
‘y = function(x)’ to transform time values (e.g.,
convert.time = 'y = x/3600'
to convert seconds to
hours).
If more than one read type is identified in the provided data file, the user will be prompted to specify which measurements belong to growth, fluorescence, and fluorescence2, respectively.
Run a complete growth analysis workflow
QurvE
reduces all computational steps required to create
a complete growth profiling to two steps, read data and
run workflow.
After loading the package:
we load experimental data from the publication Wirth & Nikel (2021) in which Pseudomonas putida KT2440 and an engineered strain were tested for their sensitivity towards the product 2fluoromuconic acid:
Load data
grodata < read_data(data.growth = system.file("2FMA_toxicity.csv",
package = "QurvE"), csvsep = ";")
The created object grodata
can be inspected with
View(grodata)
. It is a list of class grodata
containing:
a
time
matrix with 66 rows, each corresponding to one sample in the dataset, and 161 columns, i.e., time values for each sample.a
growth
data frame with 66 rows and 161+3 columns. The three additional columns contain the sample identifierscondition
,replicate
, andconcentration
.fluorescence1
(here:NA
)fluorescence2
(here:NA
)norm.fluorescence1
(here:NA
)norm.fluorescence2
(here:NA
)expdesign
, a data frame containing thelabel
,condition
,replicate
, andconcentration
for each sample:
head(grodata$expdesign)
#> label condition replicate concentration
#> 1 KT2440  1  90 KT2440 1 90
#> 2 KT2440  1  70 KT2440 1 70
#> 3 KT2440  1  50 KT2440 1 50
#> 4 KT2440  1  25 KT2440 1 25
#> 5 KT2440  1  20 KT2440 1 20
#> 6 KT2440  1  15 KT2440 1 15
We can plot the raw data. Applying the generic plot()
function to grodata
objects calls the function
plot.grodata()
.:
plot(grodata, data.type = "growth", log.y = FALSE,
x.lim = c(NA, 32), legend.position = "right",
exclude.conc = c(50, 70, 90),
basesize = 10, legend.ncol = 1, lwd = 0.7)
Run Workflow
To perform a complete growth profiling of all samples in the input
dataset, we call the growth.workflow()
function on the
grodata
object. With supress.messages = TRUE
, we
avoid printing information about every sample’s fit in the sample to the
console. By default, the selected response parameter to perform a
doseresponse analysis is ‘mu.linfit’. To choose a different parameter,
provide the argument dr.parameter = 'choice'
. A list
of appropriate parameters is provided within the function documentation
(?growth.workflow
).
grofit < growth.workflow(grodata = grodata, fit.opt = "a", ec50 = TRUE,
suppress.messages = TRUE,
export.res = FALSE, # Prevent creating TXT table and RData files with results
parallelize = FALSE) # Use only one available CPU core
If option export.res
is
set to TRUE
, tabdelimited
.txt files summarizing the computation results are created, as well as
the grofit
object (an object of class grofit
)
as .RData file. This object (or the .RData file) contains all raw data,
fitting options, and computational results. Figure
@ref(fig:grofitcontainer) shows the structure of the generated
grofit
object. In RStudio, View(grofit)
allows
interactive inspection of the data container.
If you want to create a report summarizing all computational results
including a graphical representation of every fit, provide the desired
output format(s) as report = 'pdf'
, report = 'html'
, or report = c('pdf', 'html')
. The
advantage of having the report in HTML format is that every figure can
be exported as (editable) PDF file.
In the spirit of good scientific practice (data transparency), I would encourage anyone using QurvE to attach the .RData file and generated reports to their publication.
Arguments that are commonly modified:
fit.opt

Which growth fitting methods to perform; a string containing
'l' for linear fits, 's' for spline fits,
'm' for model fits, or 'a' (the default) for
all three methods. Combinations can be also given as a vector of
strings, e.g., c('l', 's').

model.type

Which growth models to apply; a string containing one of, or a vector of strings containing any combination of ‘logistic’, ‘richards’, ‘gompertz’, ‘gompertz.exp’, ‘huang’, and ‘baranyi’. 
log.y.lin log.y.spline log.y.model

Should Ln(y/y0) be applied to the growth data for the respective fits? 
biphasic

Extract growth parameters for two different growth phases (as observed with, e.g., diauxic shifts) 
interactive

Controls interactive mode. If TRUE , each fit is visualized
in the Plots pane and the user can adjust fitting parameters and confirm
the reliability of each fit per sample

nboot.gc

Number of bootstrap samples used for nonparametric growth curve fitting.
See ?growth.gcBootSpline for details.

dr.method

Define the method used to perform a doseresponde analysis: smooth
spline fit ('spline' ) or model fitting
('model' , the default). See section 4

dr.parameter

The response parameter in the output table to be used for creating a
dose response curve. See ?growth.drFit for further details.

Please consult ?growth.workflow
for further arguments to
customize the workflow.
Tabular results
A grofit
object contains two tables summarizing the
computational results:  grofit$gcFit$gcTable
lists all
calculated physiological parameters for every sample and fit 
grofit$drFit$drTable
contains the results of the
doseresponse analysis
# show the first three rows and first 14 columns of gcTable
gcTable < grofit$gcFit$gcTable
gcTable[1:3, 1:14]
TestId AddId concentration reliability_tag used.model log.x log.y.lin
log.y.spline 1 KT2440 1 90 TRUE
# Show drTable. The function as.data.frame() ensures that it is shown in table format.
drTable < as.data.frame(grofit$drFit$drTable)
Additionally, the dedicated functions
table_group_growth_linear()
,
table_group_growth_model()
, and
table_group_growth_spline()
allow the generation of grouped
results tables for each of the three fit types with averages and
standard deviations. The column headers in the resulting data frames are
formatted with HTML for visualization in shiny and with
DT::datatable()
.
A summary of results for each individual fit can be obtained by
applying the generic function summary()
to any fit object
within grofit
.
Visualize results
Several generic plot()
methods have been written to
allow easy plotting of results by merely accessing list items within the
grofit
object structure (Figure
@ref(fig:grofitcontainer)).
Grouped spline fits
Applying plot()
to the grofit
object
produces a figure of all spline fits performed as well as the first
derivative (slope) over time. The generic function calls
plot.grofit()
with data.type = 'spline'
and
thus, the same options are available as described for Figure
@ref(fig:rawdataplot).
plot(grofit,
data.type = "spline",
log.y = TRUE,
deriv = TRUE,
conc = c(0,5,10,15,20),
legend.position = "right",
legend.ncol = 1,
x.lim = c(NA, 32),
y.lim = c(0.01,NA),
n.ybreaks = 10,
basesize=10,
lwd = 0.7)
Compare growth parameters
A convenient way to compare the performance of different organisms
under different conditions is to plot the calculated growth parameters
by means of the function plot.parameter()
.
# Parameters obtained from linear regression
plot.parameter(grofit, param = "mu.linfit", basesize = 10, legend.position = "bottom")
plot.parameter(grofit, param = "dY.linfit", basesize = 10, legend.position = "bottom")
# Parameters obtained from nonparametric fits
plot.parameter(grofit, param = "mu.spline", basesize = 10, legend.position = "bottom")
plot.parameter(grofit, param = "dY.spline", basesize = 10, legend.position = "bottom")
# Parameters obtained from model fits
plot.parameter(grofit, param = "mu.model", basesize = 10, legend.position = "bottom")
plot.parameter(grofit, param = "dY.orig.model", basesize = 10,
legend.position = "bottom")
From the parameter plot for ´mu.linfit´ (the growth rates determined with linear regression), we can see that there is an outlier for strain KT2440 at concentration 0. We can plot the individual fits for this condition to find out if this is due to the fit quality:
plot(grofit$gcFit$gcFittedLinear$`KT2440  1  0`, cex.lab = 1.2,
cex.axis = 1.2)
plot(grofit$gcFit$gcFittedLinear$`KT2440  2  0`, cex.lab = 1.2,
cex.axis = 1.2)