This tutorial presents a real example where dominance analysis is used to determine predictors’ importance in a binomial logistic regression model (Azen and Traxel, 2009). More specifically, we model the distribution of a tropical native bird species, inhabiting a small oceanic island, using a binomial generalized linear model, and dominance analysis to identify the most important environmental variables.

- Introducing a tropical bird
- Fitting a logistic regression model
- Using dominance analysis
- Applying bootstrap analysis

This document explains how to perform a dominance analysis to compare
the relative importance of predictors in a binomial logistic regression
model, using dominanceanalysis
package. It is important to note that it only describes a small part of
all dominanceanalysis functions. Nonetheless, it includes the most
significant ones, such as `dominanceAnalysis()`

,
`da.glm.fit()`

, `bootDominanceAnalysis()`

, and
`bootAverageDominanceAnalysis()`

.

Understanding how a species is distributed throughout the landscape is key to create effective conservation actions. By disentangling the limiting factors behind a species distribution, we can start to understand its ecological requirements, which can help support conservation and population management actions.

In this tutorial, we explore the distribution of a tropical native bird species inhabiting a small oceanic island. Since human occupation, the island’s forests have disappeared from the flat lowland areas, located closer to the coastline. Nowadays, these areas are considered anthropogenic areas, which include cities, agricultural areas (e.g., horticultures), savannas, and oil-palm monocultures.

We use binomial generalized linear models (GLMs) to explore the role of several environmental variables in shaping this species distribution. Furthermore, we use dominance analysis to determine the relative importance of every variable in the logistic regression model.

We use the `tropicbird`

dataset, which is a collection of
points distributed across the island (Soares, 2017). In each of these
points, a 10-minute count was carried out to record the species presence
(assuming 1 if the species was present, or 0 if it was absent). The
species’ presence/absence is the binary response variable (i.e.,
dependent variable). Additionally, we characterized all sampled points
for each of the following environmental variables (i.e., independent
variables, or predictors):

*remoteness (rem)*is an index that represents the difficulty of movement through the landscape, with the highest values corresponding to the most remote areas;*land use (land)*is an index that represents the land-use intensification, with the highest values corresponding to the more humanized areas (e.g., cities, agricultural areas, horticultures, oil-palm monocultures);*altitude (alt)*is a continuous variable, with the highest values corresponding to the higher altitude areas;*slope (slo)*is a continuous variable, with the highest values corresponding to the steepest areas;*rainfall (rain)*is a continuous variable, with the highest values corresponding to the rainy wet areas;*distance to the coast (coast)*is the minimum linear distance between each point and the coast line, with the highest values corresponding to the points further away from the coastline.

Please note that in this dataset there are no false negatives, hence the bird was always recorded if present. Also, the dataset has no missing values, so it is already prepared for the analysis.

We start by loading the csv data using the `data`

function.

To see how the dataset is organized we can just write
`str(tropicbird)`

. The first column represents the ID of each
point. From the second to the seventh column we have the six continuous
predictors (*rem, alt, slo, rain, coast,* and *land*), and
finally in the last column we have the binary response variable
(*pres*).

With the `str()`

function, we can conclude the dataset has
2398 points, which we already know are distributed throughout the
island.

```
str(tropicbird)
#> 'data.frame': 2398 obs. of 8 variables:
#> $ ID : int 1 2 3 4 5 6 7 8 9 10 ...
#> $ rem : num 5.77 5.78 5.79 5.8 5.82 ...
#> $ alt : int 67 49 32 23 53 243 244 307 356 380 ...
#> $ slo : num 9.99 10.28 7.63 7.43 12.27 ...
#> $ rain : num 6396 6398 6401 6404 6456 ...
#> $ coast: num 0.00657 0.00471 0.00287 0.00108 0.00231 0.00443 0.00433 0.00445 0.00374 0.00427 ...
#> $ land : int 2 2 2 2 2 2 2 2 2 2 ...
#> $ pres : int 0 0 0 0 0 0 0 0 0 0 ...
```

We randomly select 70% of the points as the training set to develop
the binomial generalized linear model (*train*), and the
remaining 30% as the testing set to validate the model (*test*).
However, we have to import caTools package.

The next step is to fit the model to the data frame
`train`

, using the `glm()`

function. Note that
distribution of the response variable is defined by the argument
`family=`

, which in this case corresponds to the binomial
distribution.

The function `summary()`

provides the summarized results
of our model.

```
summary(modpres)
#>
#> Call:
#> glm(formula = pres ~ rem + land + alt + slo + rain + coast, family = binomial(link = "logit"),
#> data = train)
#>
#> Coefficients:
#> Estimate Std. Error z value Pr(>|z|)
#> (Intercept) -1.255e+01 1.669e+00 -7.518 5.54e-14 ***
#> rem 6.225e-01 1.998e-01 3.116 0.001833 **
#> land 3.009e-01 4.048e-01 0.743 0.457210
#> alt 1.920e-03 4.835e-04 3.972 7.13e-05 ***
#> slo 1.588e-02 1.567e-02 1.013 0.310834
#> rain 6.892e-04 1.706e-04 4.040 5.35e-05 ***
#> coast 2.865e+01 8.476e+00 3.380 0.000725 ***
#> ---
#> Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
#>
#> (Dispersion parameter for binomial family taken to be 1)
#>
#> Null deviance: 530.66 on 1677 degrees of freedom
#> Residual deviance: 352.15 on 1671 degrees of freedom
#> AIC: 366.15
#>
#> Number of Fisher Scoring iterations: 8
```

Remember, our goal with this analysis is to describe the occurrence
of our tropical bird species in terms of a linear combination of six
environmental variables (i.e., predictors) and a constant term
(*intercept*).

First, we can see that remoteness (*rem*), altitude
(*alt*), rainfall (*rain*) and distance to coast
(*coast*) are statistically significant predictors (*p*
< 0.05). Altitude has the lower *p*-value suggesting this
predictor has a strong association with the species occurrence. All
significant predictors have a positive coefficient, which indicates that
our bird is associated to remote, rainy, higher altitude areas, further
way from the coast.

If we use the `anova()`

function, we can interpret the
table of deviance.

```
anova(modpres, test="Chisq")
#> Analysis of Deviance Table
#>
#> Model: binomial, link: logit
#>
#> Response: pres
#>
#> Terms added sequentially (first to last)
#>
#>
#> Df Deviance Resid. Df Resid. Dev Pr(>Chi)
#> NULL 1677 530.66
#> rem 1 145.298 1676 385.36 < 2.2e-16 ***
#> land 1 1.446 1675 383.92 0.2292467
#> alt 1 10.647 1674 373.27 0.0011027 **
#> slo 1 0.718 1673 372.55 0.3967159
#> rain 1 8.057 1672 364.49 0.0045317 **
#> coast 1 12.346 1671 352.15 0.0004418 ***
#> ---
#> Signif. codes: 0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1
```

We must look at the difference between the null deviance, which is the deviance of the null model (i.e., model with only the intercept), and the residual deviance. The bigger is difference the best our model is doing against the null model. In our case, we can see that adding remoteness alone reduces the deviance drastically (i.e., from 530.66 to 385.36). The small deviance value of slope indicates this variable does not add much to the model, meaning that almost the same amount of variation is explained when this variable is added.

The McFadden index, *R ^{2}M*, is sometimes referred to
as closer equivalent of the coefficient of determination,

`pR2()`

function in the pscl
package.```
library(pscl)
#> Classes and Methods for R originally developed in the
#> Political Science Computational Laboratory
#> Department of Political Science
#> Stanford University (2002-2015),
#> by and under the direction of Simon Jackman.
#> hurdle and zeroinfl functions by Achim Zeileis.
pR2(modpres)
#> fitting null model for pseudo-r2
#> llh llhNull G2 McFadden r2ML r2CU
#> -176.0740171 -265.3300722 178.5121103 0.3363963 0.1009205 0.3722362
```

After fitting the logistic regression to our dataset, we know how our species responds to the six environmental variables. Still, we are interested in the relative importance of each variable. Please note that we do not seek to identify which one of these predictors must be eliminated to achieve the best model. If that was our goal, we would use one of the several statistical model selection procedures, like the lasso. Instead, we want to assess predictors’ importance through the comparison of their individual contributions in the selected model. In other words, we want to explore the importance of each environmental variable to predict the species occurrence. Furthermore, this information will allow us to recognize the limiting factors constraining our species’ distribution, which if you remember can be used to create effective conservation actions.

Initially, dominance analysis was developed for ordinary least squares regressions (Budescu, 1993), but currently it can be used with logistic regression models (Azen and Traxel, 2009) and hierarchical linear models (Luo and Azen, 2013).

This method is used to determine the relative importance of predictors in a regression analysis. Importance is defined as a qualitative comparison between pairs of predictors (Budescu, 1993). With this being said, one predictor is more important than another, if it contributes more to the prediction of the response variable in all possible subset models (i.e., all possible combinations of predictors) (Azen and Budescu, 2003). Nevertheless, we highlight that importance depends upon the set of predictors considered in the analysis.

In dominance analysis, one predictor is said to completely dominate another, if its additional contribution to every possible subset model (that doesn’t include any of the predictors) is greater than that of the other predictor (Azen and Traxel, 2009). However, if this level of dominance cannot be established, but the average additional contribution of that predictor within each model size is greater than that of the other predictor, we can say that the first conditionally dominates the latter. Yet, if this is still not established, but this predictor’s average conditional contribution is greater than that of the other predictor over all model sizes, we can say that the first generally dominates the latter.

For ordinary least squares regressions, the predictors’ additional
contribution to a certain subset model is defined as the change in
*R ^{2}* when the predictor is added to the model. In
logistic regressions, several analogues of

`da.glm.fit()`

function.With this very brief introduction to dominance analysis, we can start
to analyze our dataset. We can use the `glm`

object to
perform dominance analysis, by using the
`dominanceAnalysis()`

function.

To show all the results, we use the `print()`

function.
However, we can explore just the raw values of each fit index by using
`getFits()`

. These raw values are organized in tables, one
for each fit index. For simplicity, we only consider the McFadden index,
*R ^{2}M*, to interpret the results (e.g.,

`$fits$r2.m`

).```
getFits(dapres,"r2.m")
#>
#> Dominance analysis fit matrices
#> * Fit index: r2.m
#> rem land alt slo rain coast
#> 1 0.274 0.156 0.074 0.038 0.069 0.125
#> rem 0.003 0.023 0.005 0.000 0.015
#> land 0.121 0.014 0.006 0.033 0.040
#> alt 0.222 0.095 0.014 0.157 0.058
#> slo 0.240 0.123 0.050 0.072 0.105
#> rain 0.205 0.121 0.163 0.041 0.186
#> coast 0.164 0.071 0.007 0.018 0.130
#> rem+land 0.020 0.004 0.001 0.012
#> rem+alt 0.000 0.001 0.014 0.005
#> rem+slo 0.002 0.020 0.001 0.013
#> rem+rain 0.004 0.037 0.005 0.028
#> rem+coast 0.000 0.013 0.003 0.014
#> land+alt 0.127 0.003 0.093 0.029
#> land+slo 0.118 0.011 0.038 0.039
#> land+rain 0.088 0.073 0.010 0.077
#> land+coast 0.093 0.003 0.005 0.071
#> alt+slo 0.209 0.084 0.153 0.058
#> alt+rain 0.079 0.030 0.010 0.077
#> alt+coast 0.169 0.067 0.014 0.177
#> slo+rain 0.169 0.090 0.132 0.159
#> slo+coast 0.148 0.057 0.003 0.126
#> rain+coast 0.047 0.011 0.054 0.014
#> rem+land+alt 0.001 0.015 0.006
#> rem+land+slo 0.018 0.002 0.011
#> rem+land+rain 0.034 0.004 0.025
#> rem+land+coast 0.014 0.003 0.014
#> rem+alt+slo 0.000 0.015 0.004
#> rem+alt+rain 0.000 0.002 0.023
#> rem+alt+coast 0.001 0.001 0.032
#> rem+slo+rain 0.003 0.034 0.027
#> rem+slo+coast 0.000 0.011 0.015
#> rem+rain+coast 0.000 0.031 0.004
#> land+alt+slo 0.126 0.094 0.030
#> land+alt+rain 0.049 0.004 0.050
#> land+alt+coast 0.103 0.003 0.114
#> land+slo+rain 0.082 0.066 0.076
#> land+slo+coast 0.091 0.002 0.075
#> land+rain+coast 0.036 0.046 0.010
#> alt+slo+rain 0.071 0.024 0.072
#> alt+slo+coast 0.156 0.056 0.167
#> alt+rain+coast 0.025 0.004 0.005
#> slo+rain+coast 0.037 0.007 0.045
#> rem+land+alt+slo 0.015 0.005
#> rem+land+alt+rain 0.002 0.023
#> rem+land+alt+coast 0.001 0.032
#> rem+land+slo+rain 0.032 0.025
#> rem+land+slo+coast 0.012 0.015
#> rem+land+rain+coast 0.032 0.004
#> rem+alt+slo+rain 0.000 0.022
#> rem+alt+slo+coast 0.001 0.033
#> rem+alt+rain+coast 0.001 0.002
#> rem+slo+rain+coast 0.000 0.029
#> land+alt+slo+rain 0.047 0.050
#> land+alt+slo+coast 0.101 0.114
#> land+alt+rain+coast 0.022 0.004
#> land+slo+rain+coast 0.031 0.040
#> alt+slo+rain+coast 0.021 0.002
#> rem+land+alt+slo+rain 0.023
#> rem+land+alt+slo+coast 0.033
#> rem+land+alt+rain+coast 0.002
#> rem+land+slo+rain+coast 0.030
#> rem+alt+slo+rain+coast 0.001
#> land+alt+slo+rain+coast 0.020
#> rem+land+alt+slo+rain+coast
```

The first row represents the raw values of each univariate model. The
following rows show the additional contribution of each predictor added
to the subset model (indicated by the first column). For example, the
univariate model containing altitude produces *R ^{2}M* =
0.074 (see entry in the first row under the

Furthermore, if the additional contributions of a predictor are
higher than that of other predictor for every subset model, the first
predictor is said to completely dominate the second. This is the case
with distance to coast, which completely dominates slope (compare the
values of the columns *coast* and *slo* in the previous
table). The summarized results for complete dominance could be retrieved
using `dominanceMatrix()`

.

```
dominanceMatrix(dapres, type="complete",fit.functions = "r2.m", ordered=TRUE)
#> rem coast alt rain land slo
#> rem 0.5 0.5 0.5 0.5 1.0 1.0
#> coast 0.5 0.5 0.5 0.5 0.5 1.0
#> alt 0.5 0.5 0.5 0.5 0.5 0.5
#> rain 0.5 0.5 0.5 0.5 0.5 0.5
#> land 0.0 0.5 0.5 0.5 0.5 0.5
#> slo 0.0 0.0 0.5 0.5 0.5 0.5
```

This complete dominance matrix summarizes the relation between each
pair of predictors. If the value between two predictors is 1, the
predictor under the first column completely dominates the other
predictor of the pair. If the value is 0, the predictor under the first
column is completely dominated by the other predictor of the pair.
Lastly, if the value is 0.5, complete dominance could not be established
between the pair. For this reason, as distance to coast dominates slope
completely in all submodels, in the matrix the element row:coast-col:slo
have a value of 1 (see entry in the *coast* row under the
*slo* column of the table).

However, if complete dominance cannot be established, we explore
conditional dominance by using method
`contributionByLevel()`

.

```
contributionByLevel(dapres,fit.functions="r2.m")
#>
#> Contribution by level
#> * Fit index: r2.m
#> level rem land alt slo rain coast
#> 0 0.274 0.156 0.074 0.038 0.069 0.125
#> 1 0.190 0.082 0.051 0.017 0.079 0.081
#> 2 0.125 0.034 0.037 0.007 0.069 0.050
#> 3 0.078 0.009 0.030 0.004 0.054 0.033
#> 4 0.044 0.001 0.029 0.003 0.042 0.025
#> 5 0.020 0.001 0.030 0.002 0.033 0.023
```

For each model size (see column *level* of the table), the
average additional contribution of each predictor is calculated. For
example, the average additional contribution of altitude to models of
size 1 is computed as (0.0072582 + 0.0137805 + 0.1629760 + 0.0227860 +
0.0504051)/5 = 0.051. To establish conditional dominance, we compare the
average additional contributions across all model sizes. For example,
rainfall conditionally dominates slope, because the average additional
contribution of rainfall is higher than that of slope across all model
sizes (compare the values of the columns *rain* and *slo*
in the table).

A graph of contribution by levels can be plotted using method
`plot()`

with argument
`which.graph='conditional'`

.

The summarized results for conditional dominance can be retrieved
using `dominanceMatrix()`

(see entry in the *rain* row
under the *slo* column of the table).

```
dominanceMatrix(dapres, type="conditional",fit.functions = "r2.m", ordered=TRUE)
#> rem alt rain coast land slo
#> rem 0.5 0.5 0.5 0.5 1.0 1.0
#> alt 0.5 0.5 0.5 0.5 0.5 1.0
#> rain 0.5 0.5 0.5 0.5 0.5 1.0
#> coast 0.5 0.5 0.5 0.5 0.5 1.0
#> land 0.0 0.5 0.5 0.5 0.5 0.5
#> slo 0.0 0.0 0.0 0.0 0.5 0.5
```

Lastly, if conditional dominance cannot be established, we explore
general dominance by using `averageContribution()`

method.

```
averageContribution(dapres,fit.functions = "r2.m")
#>
#> Average Contribution by predictor
#> rem land alt slo rain coast
#> r2.m 0.122 0.047 0.042 0.012 0.058 0.056
```

The average contribution could be also plotted using method
`plot()`

with argument `which.graph='general'`

To determine general dominance, we compute the mean of each
predictor’s conditional measures. We conclude that remoteness has the
highest value (0.122) and generally dominates all other predictors. For
this reason, in the general dominance matrix, remoteness assumes a value
of 1 with all other predictors (see entry in the *rem* row under
every column of the table).

```
dominanceMatrix(dapres, type="general",fit.functions = "r2.m", ordered=TRUE)
#> rem rain coast land alt slo
#> rem 0.5 1.0 1.0 1.0 1.0 1.0
#> rain 0.0 0.5 1.0 1.0 1.0 1.0
#> coast 0.0 0.0 0.5 1.0 1.0 1.0
#> land 0.0 0.0 0.0 0.5 1.0 1.0
#> alt 0.0 0.0 0.0 0.0 0.5 1.0
#> slo 0.0 0.0 0.0 0.0 0.0 0.5
```

Nevertheless, depending on the goals, we might want to analyze the dominance between all pairs of predictors. If this is the case, we can simply use the dominance matrices explained above, which summarize the relation between pairs of predictors in three values (0, 0.5 and 1). In our example, when looking at complete dominance matrix, we conclude that distance to coast completely dominates slope, and remoteness completely dominates land use and slope. However, when looking at conditional dominance matrix, we realize that altitude conditionally dominates slope, and rainfall conditionally dominates slope. Lastly, when exploring general dominance matrix, we conclude that distance to coast generally dominates altitude and land use, land use generally dominates altitude and slope, rainfall generally dominates altitude, distance to coast and land use, and remoteness generally dominates altitude, distance to coast and rainfall.

Furthermore, if we want to establish a rank of importance among predictors, we can explore the raw values of general dominance. In our example, we conclude that remoteness is clearly the most important predictor to explain bird species occurrence (0.122), followed by rainfall (0.058), distance to coast (0.056), land use (0.047), altitude (0.042) and slope (0.012).

To evaluate the robustness of our results, we use bootstrapping
analysis by using `bootDominanceAnalysis()`

function.
Remember that this method could take a long time to complete.

```
set.seed(12346)
bootmodpres100 <- bootDominanceAnalysis(modpres, R=10)
summary(bootmodpres100,fit.functions="r2.m")
```

```
#> Dominance Analysis
#> ==================
#> Fit index: r2.m
#> dominance i k Dij mDij SE.Dij Pij Pji Pnoij Rep
#> complete rem land 1.0 0.995 0.0500 0.99 0.00 0.01 0.99
#> complete rem alt 0.5 0.605 0.2047 0.21 0.00 0.79 0.79
#> complete rem slo 1.0 0.990 0.0704 0.98 0.00 0.02 0.98
#> complete rem rain 0.5 0.615 0.2115 0.23 0.00 0.77 0.77
#> complete rem coast 0.5 0.730 0.2505 0.46 0.00 0.54 0.54
#> complete land alt 0.5 0.500 0.0000 0.00 0.00 1.00 1.00
#> complete land slo 0.5 0.510 0.0704 0.02 0.00 0.98 0.98
#> complete land rain 0.5 0.500 0.0000 0.00 0.00 1.00 1.00
#> complete land coast 0.5 0.480 0.0985 0.00 0.04 0.96 0.96
#> complete alt slo 0.5 0.585 0.1888 0.17 0.00 0.83 0.83
#> complete alt rain 0.5 0.490 0.0704 0.00 0.02 0.98 0.98
#> complete alt coast 0.5 0.440 0.1633 0.00 0.12 0.88 0.88
#> complete slo rain 0.5 0.365 0.2231 0.00 0.27 0.73 0.73
#> complete slo coast 0.0 0.185 0.2426 0.00 0.63 0.37 0.63
#> complete rain coast 0.5 0.535 0.1282 0.07 0.00 0.93 0.93
#> conditional rem land 1.0 0.995 0.0500 0.99 0.00 0.01 0.99
#> conditional rem alt 0.5 0.605 0.2047 0.21 0.00 0.79 0.79
#> conditional rem slo 1.0 0.990 0.0704 0.98 0.00 0.02 0.98
#> conditional rem rain 0.5 0.615 0.2115 0.23 0.00 0.77 0.77
#> conditional rem coast 0.5 0.730 0.2505 0.46 0.00 0.54 0.54
#> conditional land alt 0.5 0.500 0.0000 0.00 0.00 1.00 1.00
#> conditional land slo 0.5 0.510 0.0704 0.02 0.00 0.98 0.98
#> conditional land rain 0.5 0.500 0.0000 0.00 0.00 1.00 1.00
#> conditional land coast 0.5 0.480 0.0985 0.00 0.04 0.96 0.96
#> conditional alt slo 0.5 0.585 0.1888 0.17 0.00 0.83 0.83
#> conditional alt rain 0.5 0.490 0.0704 0.00 0.02 0.98 0.98
#> conditional alt coast 0.5 0.440 0.1633 0.00 0.12 0.88 0.88
#> conditional slo rain 0.5 0.365 0.2231 0.00 0.27 0.73 0.73
#> conditional slo coast 0.0 0.185 0.2426 0.00 0.63 0.37 0.63
#> conditional rain coast 0.5 0.535 0.1282 0.07 0.00 0.93 0.93
#> general rem land 1.0 0.995 0.0500 0.99 0.00 0.01 0.99
#> general rem alt 0.5 0.605 0.2047 0.21 0.00 0.79 0.79
#> general rem slo 1.0 0.990 0.0704 0.98 0.00 0.02 0.98
#> general rem rain 0.5 0.615 0.2115 0.23 0.00 0.77 0.77
#> general rem coast 0.5 0.730 0.2505 0.46 0.00 0.54 0.54
#> general land alt 0.5 0.500 0.0000 0.00 0.00 1.00 1.00
#> general land slo 0.5 0.510 0.0704 0.02 0.00 0.98 0.98
#> general land rain 0.5 0.500 0.0000 0.00 0.00 1.00 1.00
#> general land coast 0.5 0.480 0.0985 0.00 0.04 0.96 0.96
#> general alt slo 0.5 0.585 0.1888 0.17 0.00 0.83 0.83
#> general alt rain 0.5 0.490 0.0704 0.00 0.02 0.98 0.98
#> general alt coast 0.5 0.440 0.1633 0.00 0.12 0.88 0.88
#> general slo rain 0.5 0.365 0.2231 0.00 0.27 0.73 0.73
#> general slo coast 0.0 0.185 0.2426 0.00 0.63 0.37 0.63
#> general rain coast 0.5 0.535 0.1282 0.07 0.00 0.93 0.93
```

This method provides measures of accuracy for our estimates. More
specifically, the bootstrap values of complete, conditional and general
dominance are calculated for each pair of predictors (see column
*Dij* that represents the original result, *mDij* that
represents the mean for *Dij* on bootstrap samples, and
*SE.Dij* that represents standard error). These values of
dominance can be interpreted as the expected level of dominance between
pairs of predictors, as the degree to which this pattern was found on
the resamples. Note that we recommend this analysis is performed with at
least 1000 replications (*R*), with the size of the original
sample, for precise results (i.e., bootstrap samples).

Additionally, other parameters are estimated: *Pij*
(proportion of bootstrap samples where *i* dominates *j*);
*Pji* (proportion of bootstrap samples where *j* dominates
*i*); *Pnoij* (proportion of samples where no dominance
can be asserted); and *Rep* (proportion of samples where original
dominance is replicated). When standard error and reproducibility are
close or equal to zero and one, respectively, the results are fairly
robust. For example, in our analysis we see that the bootstrap complete
dominance of remoteness over land use has a standard error of 0.05 and a
reproducibility of 0.99.

Moreover, we can obtain bootstrap general dominance values by using
`bootAverageDominanceAnalysis()`

function.

```
bootavemodpres100<-bootAverageDominanceAnalysis(modpres,R=100)
summary(bootavemodpres100,fit.functions=c("r2.m"))
```

```
#> Bootstrap Average for Dominance Analysis
#> ========================================
#> Resamples: 100
#> Fit index: r2.m
#> Var original bs.E bias bs.SE
#> 1 rem 0.1219 0.1259 0.003985 0.02136
#> 2 land 0.0473 0.0480 0.000688 0.00718
#> 3 alt 0.0418 0.0417 -0.000176 0.01161
#> 4 slo 0.0117 0.0135 0.001781 0.00736
#> 5 rain 0.0576 0.0601 0.002572 0.01275
#> 6 coast 0.0561 0.0574 0.001377 0.01395
```

The results are organized per fit index and include the estimated
bootstrap values of general dominance for each predictor (*bs.E*)
and its corresponding standard errors (*bs.SE*), as well as the
previously calculated general dominance values (*original*). The
difference between these values and the estimated bootstrap values is
represented by *Bias*. In our example, the bias is small, which
is another good indicator of our results’ robustness.

*Following the citation rules of Biological Conservation*

Azen, R., Budescu, D. V., 2003. The Dominance Analysis Approach for Comparing Predictors in Multiple Regression. Psychol. Methods 8, 129-148. https://doi.org/10.1037/1082-989X.8.2.129

Azen, R., Traxel, N., 2009. Using Dominance Analysis to Determine Predictor Importance in Logistic Regression. J. Educ. Behav. Stat. 34, 319-347. https://doi.org/10.3102/1076998609332754

Budescu, D. V., 1993. Dominance analysis: A new approach to the problem of relative importance of predictors in multiple regression. Psychol. Bull. 114, 542-551. https://doi.org/10.1037/0033-2909.114.3.542

Luo, W., Azen, R., 2013. Determining Predictor Importance in Hierarchical Linear Models Using Dominance Analysis. J. Educ. Behav. Stat. 38, 3-31. https://doi.org/10.3102/1076998612458319

Soares, F.C., 2017. Modelling the distribution of Sao Tome bird species: Ecological determinants and conservation prioritization. Faculdade de Ciencias da Universidade de Lisboa.

Author’s e-mail: [email protected]