In experiments, we control the conditions under which observations are made. Ideally, this leads to balanced datasets and clear inferences about the effects of those experimental conditions. In observational data, factor levels are observed rather than controlled, and in the analysis we control *for* those factors and covariates. It is possible that some factors and covariates lie in the causal path for other predictors. Observational studies can be designed in ways to mitigate some of these issues; but often we are left with a mess. Using EMMs does not solve the inherent problems in messy, undesigned studies; but they do give us ways to compensate for imbalance in the data, and allow us to estimate meaningful effects after carefully considering the ways in which they can be confounded.

As an illustration, consider the `nutrition`

dataset provided with the package. These data are used as an example in Milliken and Johnson (1992), *Analysis of Messy Data*, and contain the results of an observational study on nutrition education. Low-income mothers are classified by race, age category, and whether or not they received food stamps (the `group`

factor); and the response variable is a gain score (post minus pre scores) after completing a nutrition training program. First, let’s fit a model than includes all main effects and 2-way interactions, and obtain its “type II” ANOVA:

```
nutr.lm <- lm(gain ~ (age + group + race)^2, data = nutrition)
car::Anova(nutr.lm)
```

```
## Note: model has aliased coefficients
## sums of squares computed by model comparison
```

```
## Anova Table (Type II tests)
##
## Response: gain
## Sum Sq Df F value Pr(>F)
## age 82.37 3 0.9614 0.4145
## group 658.13 1 23.0441 6.105e-06
## race 11.17 2 0.1956 0.8227
## age:group 91.58 3 1.0688 0.3663
## age:race 87.30 3 1.0189 0.3880
## group:race 113.70 2 1.9906 0.1424
## Residuals 2627.47 92
```

There is definitely a `group`

effect and a hint of and interaction with `race`

. Here are the EMMs for those two factors, along with their counts:

`emmeans(nutr.lm, ~ group * race, calc = c(n = ".wgt."))`

```
## group race emmean SE df n lower.CL upper.CL
## FoodStamps Black 4.71 2.37 92 7 0.00497 9.41
## NoAid Black -2.19 2.49 92 14 -7.13690 2.76
## FoodStamps Hispanic nonEst NA NA 1 NA NA
## NoAid Hispanic nonEst NA NA 2 NA NA
## FoodStamps White 3.61 1.16 92 52 1.31252 5.90
## NoAid White 2.26 2.39 92 31 -2.48897 7.00
##
## Results are averaged over the levels of: age
## Confidence level used: 0.95
```

Hmmmm. The EMMs when `race`

is “Hispanic” are not given; instead they are flagged as non-estimable. What does that mean? Well, when using a model to make predictions, it is impossible to do that beyond the linear space of the data used to fit the model. And we have no data for three of the age groups in the Hispanic population:

`with(nutrition, table(race, age))`

```
## age
## race 1 2 3 4
## Black 2 7 10 2
## Hispanic 0 0 3 0
## White 5 16 51 11
```

We can’t make predictions for all the cases we are averaging over in the above EMMs, and that is why some of them are non-estimable. The bottom line is that we simply cannot include Hispanics in the mix when comparing factor effects. That’s a limitation of this study that cannot be overcome without collecting additional data. Our choices for further analysis are to focus only on Black and White populations; or to focus only on age group 3. For example (the latter):

```
summary(emmeans(nutr.lm, pairwise ~ group | race, at = list(age = "3")),
by = NULL)
```

```
## $emmeans
## group race emmean SE df lower.CL upper.CL
## FoodStamps Black 7.50 2.67 92 2.19 12.807
## NoAid Black -3.67 2.18 92 -8.00 0.666
## FoodStamps Hispanic 0.00 5.34 92 -10.61 10.614
## NoAid Hispanic 2.50 3.78 92 -5.01 10.005
## FoodStamps White 5.42 0.96 92 3.51 7.326
## NoAid White -0.20 1.19 92 -2.57 2.173
##
## Confidence level used: 0.95
##
## $contrasts
## contrast race estimate SE df t.ratio p.value
## FoodStamps - NoAid Black 11.17 3.45 92 3.237 0.0017
## FoodStamps - NoAid Hispanic -2.50 6.55 92 -0.382 0.7034
## FoodStamps - NoAid White 5.62 1.53 92 3.666 0.0004
```

(We used trickery with providing a `by`

variable, and then taking it away, to make the output more compact.) Evidently, the training program has been beneficial to the Black and White groups in that age category. There is no conclusion for the Hispanic group – for which we have very little data.

The `framing`

data in the **mediation** package has the results of an experiment conducted by Brader et al. (2008) where subjects were given the opportunity to send a message to Congress regarding immigration. However, before being offered this, some subjects (`treat = 1`

) were first shown a news story that portrays Latinos in a negative way. Besides the binary response (whether or not they elected to send a message), the experimenters also measured `emo`

, the subjects’ emotional state after the treatment was applied. There are various demographic variables as well. Let’s a logistic regression model, after changing the labels for `educ`

to shorter strings.

`framing <- mediation::framing `

```
## Registered S3 methods overwritten by 'lme4':
## method from
## cooks.distance.influence.merMod car
## influence.merMod car
## dfbeta.influence.merMod car
## dfbetas.influence.merMod car
```

```
levels(framing$educ) <- c("NA","Ref","< HS", "HS", "> HS","Coll +")
framing.glm <- glm(cong_mesg ~ age + income + educ + emo + gender * factor(treat),
family = binomial, data = framing)
```

The conventional way to handle covariates like `emo`

is to set them at their means and use those means for purposes of predictions and EMMs. These adjusted means are shown in the following plot.

`emmip(framing.glm, treat ~ educ | gender, type = "response") `

This plot gives the impression that the effect of `treat`

is reversed between male and female subjects; and also that the effect of education is not monotone. Both of these are counter-intuitive.

However, note that the covariate `emo`

is measured *post*-treatment. That suggests that in fact `treat`

(and perhaps other factors) could affect the value of `emo`

; and if that is true (as is in fact established by mediation analysis techniques), we should not pretend that `emo`

can be set independently of `treat`

as was done to obtain the EMMs shown above. Instead, let `emo`

depend on `treat`

and the other predictors – easily done using `cov.reduce`

– and we obtain an entirely different impression:

```
emmip(framing.glm, treat ~ educ | gender, type = "response",
cov.reduce = emo ~ treat*gender + age + educ + income)
```

The reference grid underlying this plot has different `emo`

values for each factor combination. The plot suggests that, after taking emotional response into account, male (but not female) subjects exposed to the negative news story are more likely to send the message than are females or those not seeing the negative news story. Also, the effect of `educ`

is now nearly monotone.

By the way, the results in this plot are the same is what you would obtain by refitting the model with an adjusted covariate

`emo.adj <- resid(lm(emo ~ treat*gender + age + educ + income, data = framing))`

… and then using ordinary covariate-adjusted means at the means of `emo.adj`

. This is a technique that is often recommended.

If there is more than one mediating covariate, their settings may be defined in sequence; for example, if `x1`

, `x2`

, and `x3`

are all mediating covariates, we might use

`emmeans(..., cov.reduce = list(x1 ~ trt, x2 ~ trt + x1, x3 ~ trt + x1 + x2))`

(or possibly with some interactions included as well).

A mediating covariate is one that is in the causal path; likewise, it is possible to have a mediating *factor*. For mediating factors, the moral equivalent of the `cov.reduce`

technique described above is to use *weighted* averages in lieu of equally-weighted ones in computing EMMs. The weights used in these averages should depend on the frequencies of mediating factor(s). Usually, the `"cells"`

weighting scheme described later in this section is the right approach. In complex situations, it may be necessary to compute EMMs in stages.

As described in the “basics” vignette, EMMs are usually defined as *equally-weighted* means of reference-grid predictions. However, there are several built-in alternative weighting schemes that are available by specifying a character value for `weights`

in a call to `emmeans()`

or related function. The options are `"equal"`

(the default), `"proportional"`

, `"outer"`

, `"cells"`

, and `"flat"`

.

The `"proportional"`

(or `"prop"`

for short) method weights proportionally to the frequencies (or model weights) of each factor combination that is averaged over. The `"outer"`

method uses the outer product of the marginal frequencies of each factor that is being averaged over. To explain the distinction, suppose the EMMs for `A`

involve averaging over two factors `B`

and `C`

. With `"prop"`

, we use the frequencies for each combination of `B`

and `C`

; whereas for `"outer"`

, first obtain the marginal frequencies for `B`

and for `C`

and weight proportionally to the product of these for each combination of `B`

and `C`

. The latter weights are like the “expected” counts used in a chi-square test for independence. Put another way, outer weighting is the same as proportional weighting applied one factor at a time; the following two would yield the same results:

```
emmeans(model, "A", weights = "outer")
emmeans(emmeans(model, c("A", "B"), weights = "prop"), weights = "prop")
```

Using `"cells"`

weights gives each prediction the same weight as occurs in the model; applied to a reference grid for a model with all interactions, `"cells"`

-weighted EMMs are the same as the ordinary marginal means of the data. With `"flat"`

weights, equal weights are used, except zero weight is applied to any factor combination having no data. Usually, `"cells"`

or `"flat"`

weighting will *not* produce non-estimable results, because we exclude empty cells. (That said, if covariates are linearly dependent with factors, we may still encounter non-estimable cases.)

Here is a comparison of predictions for `nutr.lm`

defined above, using different weighting schemes:

```
sapply(c("equal", "prop", "outer", "cells", "flat"), function(w)
predict(emmeans(nutr.lm, ~ race, weights = w)))
```

```
## equal prop outer cells flat
## [1,] 1.258929 1.926554 2.546674 0.3809524 0.6865079
## [2,] NA NA NA 1.6666667 1.2500000
## [3,] 2.932008 2.522821 3.142940 2.7951807 1.6103407
```

In the other hand, if we do `group * race`

EMMs, only one factor (`age`

) is averaged over; thus, the results for `"prop"`

and `"outer"`

weights will be identical in that case.

We have just seen that we can assign different weights to the levels of containing factors. Another option is to constrain the effects of those containing factors to zero. In essence, that means fitting a different model without those containing effects; however, for certain models (not all), an `emmGrid`

may be updated with a `submodel`

specification so as to impose such a constraint. For illustration, return again to the nutrition example, and consider the analysis of `group`

and `race`

as before, after removing interactions involving `age`

:

```
summary(emmeans(nutr.lm, pairwise ~ group | race, submodel = ~ age + group*race),
by = NULL)
```

```
## $emmeans
## group race emmean SE df lower.CL upper.CL
## FoodStamps Black 4.91 2.061 92 0.817 9.003
## NoAid Black -3.01 1.581 92 -6.148 0.133
## FoodStamps Hispanic -1.18 5.413 92 -11.935 9.567
## NoAid Hispanic 1.32 3.876 92 -6.382 9.014
## FoodStamps White 4.10 0.901 92 2.308 5.886
## NoAid White -1.44 1.114 92 -3.654 0.771
##
## Results are averaged over the levels of: age
## submodel: ~ age + group + race + group:race
## Confidence level used: 0.95
##
## $contrasts
## contrast race estimate SE df t.ratio p.value
## FoodStamps - NoAid Black 7.92 2.62 92 3.021 0.0033
## FoodStamps - NoAid Hispanic -2.50 6.55 92 -0.382 0.7034
## FoodStamps - NoAid White 5.54 1.27 92 4.364 <.0001
##
## Results are averaged over the levels of: age
```

If you like, you may confirm that we would obtain exactly the same estimates if we had fitted that sub-model to the data, except we continue to use the residual variance from the full model in tests and confidence intervals. Without the interactions with `age`

, all of the marginal means become estimable. The results are somewhat different from those obtained earlier where we narrowed the scope to just age 3. These new estimates include all ages, averaging over them equally, but with constraints that the interaction effects involving `age`

are all zero.

There are two special character values that may be used with `submodel`

. Specifying `"minimal"`

creates a submodel with only the active factors:

`emmeans(nutr.lm, ~ group * race, submodel = "minimal")`

```
## group race emmean SE df lower.CL upper.CL
## FoodStamps Black 5.000 2.020 92 0.988 9.012
## NoAid Black -1.929 1.428 92 -4.765 0.908
## FoodStamps Hispanic 0.000 5.344 92 -10.614 10.614
## NoAid Hispanic 2.500 3.779 92 -5.005 10.005
## FoodStamps White 4.769 0.741 92 3.297 6.241
## NoAid White -0.516 0.960 92 -2.422 1.390
##
## Results are averaged over the levels of: age
## submodel: ~ group + race + group:race
## Confidence level used: 0.95
```

This submodel constrains all effects involving `age`

to be zero. Another interesting option is `"type2"`

, whereby we in essence analyze the residuals of the model with all contained or overlapping effects, then constrain the containing effects to be zero. So what is left if only the interaction effects of the factors involved. This is most useful with `joint_tests()`

:

`joint_tests(nutr.lm, submodel = "type2")`

```
## model term df1 df2 F.ratio p.value note
## age 3 92 0.961 0.4145
## group 1 92 23.044 <.0001
## race 2 92 0.196 0.8227
## age:group 3 92 1.069 0.3663
## age:race 3 92 1.019 0.3880 d e
## group:race 2 92 1.991 0.1424
##
## d: df1 reduced due to linear dependence
## e: df1 reduced due to non-estimability
```

These results are identical to the type II anova obtained at the beginning of this example.

More details on how `submodel`

works may be found in `vignette("xplanations")`

A factor `A`

is nested in another factor `B`

if the levels of `A`

have a different meaning in one level of `B`

than in another. Often, nested factors are random effects—for example, subjects in an experiment may be randomly assigned to treatments, in which case subjects are nested in treatments—and if we model them as random effects, these random nested effects are not among the fixed effects and are not an issue to `emmeans`

. But sometimes we have fixed nested factors.

Here is an example of a fictional study of five fictional treatments for some disease in cows. Two of the treatments are administered by injection, and the other three are administered orally. There are varying numbers of observations for each drug. The data and model follow:

```
cows <- data.frame (
route = factor(rep(c("injection", "oral"), c(5, 9))),
drug = factor(rep(c("Bovineumab", "Charloisazepam",
"Angustatin", "Herefordmycin", "Mollycoddle"), c(3,2, 4,2,3))),
resp = c(34, 35, 34, 44, 43, 36, 33, 36, 32, 26, 25, 25, 24, 24)
)
cows.lm <- lm(resp ~ route + drug, data = cows)
```

The `ref_grid`

function finds a nested structure in this model:

```
cows.rg <- ref_grid(cows.lm)
cows.rg
```

```
## 'emmGrid' object with variables:
## route = injection, oral
## drug = Angustatin, Bovineumab, Charloisazepam, Herefordmycin, Mollycoddle
## Nesting structure: drug %in% route
```

When there is nesting, `emmeans`

computes averages separately in each group

```
route.emm <- emmeans(cows.rg, "route")
route.emm
```

```
## route emmean SE df lower.CL upper.CL
## injection 38.9 0.591 9 37.6 40.3
## oral 28.0 0.449 9 27.0 29.0
##
## Results are averaged over the levels of: drug
## Confidence level used: 0.95
```

… and insists on carrying along any grouping factors that a factor is nested in:

```
drug.emm <- emmeans(cows.rg, "drug")
drug.emm
```

```
## drug route emmean SE df lower.CL upper.CL
## Bovineumab injection 34.3 0.747 9 32.6 36.0
## Charloisazepam injection 43.5 0.915 9 41.4 45.6
## Angustatin oral 34.2 0.647 9 32.8 35.7
## Herefordmycin oral 25.5 0.915 9 23.4 27.6
## Mollycoddle oral 24.3 0.747 9 22.6 26.0
##
## Confidence level used: 0.95
```

Here are the associated pairwise comparisons:

`pairs(route.emm, reverse = TRUE)`

```
## contrast estimate SE df t.ratio p.value
## oral - injection -10.9 0.742 9 -14.671 <.0001
##
## Results are averaged over the levels of: drug
```

`pairs(drug.emm, by = "route", reverse = TRUE)`

```
## route = injection:
## contrast estimate SE df t.ratio p.value
## Charloisazepam - Bovineumab 9.17 1.182 9 7.757 <.0001
##
## route = oral:
## contrast estimate SE df t.ratio p.value
## Herefordmycin - Angustatin -8.75 1.121 9 -7.805 0.0001
## Mollycoddle - Angustatin -9.92 0.989 9 -10.030 <.0001
## Mollycoddle - Herefordmycin -1.17 1.182 9 -0.987 0.6026
##
## P value adjustment: tukey method for comparing a family of 3 estimates
```

In the latter result, the contrast itself becomes a nested factor in the returned `emmGrid`

object. That would not be the case if there had been no `by`

variable.

It can be very helpful to take advantage of special features of **ggplot2** when graphing results with nested factors. For example, the default plot for the `cows`

example is not ideal:

`emmip(cows.rg, ~ drug | route)`

We can instead remove `route`

from the call and instead handle it with **ggplot2** code to use separate *x* scales:

```
require(ggplot2)
emmip(cows.rg, ~ drug) + facet_wrap(~ route, scales = "free_x")
```

Similarly with `plot.emmGrid()`

:

```
plot(drug.emm, PIs = TRUE) +
facet_wrap(~ route, nrow = 2, scales = "free_y")
```

`ref_grid()`

and `emmeans()`

tries to discover and accommodate nested structures in the fixed effects. It does this in two ways: first, by identifying factors whose levels appear in combination with only one level of another factor; and second, by examining the `terms`

attribute of the fixed effects. In the latter approach, if an interaction `A:B`

appears in the model but `A`

is not present as a main effect, then `A`

is deemed to be nested in `B`

. Note that this can create a trap: some users take shortcuts by omitting some fixed effects, knowing that this won’t affect the fitted values. But such shortcuts *do* affect the interpretation of model parameters, ANOVA tables, etc., and I advise against ever taking such shortcuts. Here are some ways you may notice mistakenly-identified nesting:

- A message is displayed when nesting is detected
- A
`str()`

listing of the`emmGrid`

object shows a nesting component - An
`emmeans()`

summary unexpectedly includes one or more factors that you didn’t specify - EMMs obtained using
`by`

factors don’t seem to behave right, or give the same results with different specifications

To override the auto-detection of nested effects, use the `nesting`

argument in `ref_grid()`

or `emmeans()`

. Specifying `nesting = NULL`

will ignore all nesting. Incorrectly-discovered nesting can be overcome by specifying something akin to `nesting = "A %in% B, C %in% (A * B)"`

or, equivalently, `nesting = list(A = "B", C = c("A", "B"))`

.