`ggpredict()`

and `ggemmeans()`

compute predicted values for all possible levels or values from a model’s predictor. Basically, `ggpredict()`

wraps the `predict()`

-method for the related model, while `ggemmeans()`

wraps the `emmeans()`

-method from the **emmeans**-package. Both `ggpredict()`

and `ggemmeans()`

do some data-preparation to bring the data in shape for the `newdata`

-argument (`predict()`

) resp. the `at`

-argument (`emmeans()`

). It is recommended to read the general introduction first, if you haven’t done this yet.

Thus, effects returned by `ggpredict()`

*conditional effects* (i.e. these are conditioned on certain (reference) levels of factors), while `ggemmeans()`

returns *marginal means*, since the effects are “marginalized” (or “averaged”) over the levels of factors.

For models without categorical predictors, the results from `ggpredict()`

and `ggemmeans()`

are identical (except some *slight* differences in the associated confidence intervals, which are, however, negligible).

```
library(magrittr)
library(ggeffects)
data(efc)
fit <- lm(barthtot ~ c12hour + neg_c_7, data = efc)
ggpredict(fit, terms = "c12hour")
#> # Predicted values of Total score BARTHEL INDEX
#>
#> c12hour | Predicted | 95% CI
#> ------------------------------------
#> 0 | 75.07 | [72.96, 77.18]
#> 20 | 70.15 | [68.40, 71.91]
#> 45 | 64.01 | [62.41, 65.61]
#> 65 | 59.09 | [57.32, 60.86]
#> 85 | 54.17 | [52.04, 56.30]
#> 105 | 49.25 | [46.65, 51.86]
#> 125 | 44.34 | [41.18, 47.49]
#> 170 | 33.27 | [28.79, 37.76]
#>
#> Adjusted for:
#> * neg_c_7 = 11.83
ggemmeans(fit, terms = "c12hour")
#> # Predicted values of Total score BARTHEL INDEX
#>
#> c12hour | Predicted | 95% CI
#> ------------------------------------
#> 0 | 75.07 | [72.96, 77.19]
#> 20 | 70.15 | [68.40, 71.91]
#> 45 | 64.01 | [62.40, 65.61]
#> 65 | 59.09 | [57.32, 60.86]
#> 85 | 54.17 | [52.04, 56.31]
#> 105 | 49.25 | [46.64, 51.87]
#> 125 | 44.34 | [41.18, 47.49]
#> 170 | 33.27 | [28.78, 37.76]
#>
#> Adjusted for:
#> * neg_c_7 = 11.83
```

As can be seen, the continuous predictor `neg_c_7`

is held constant at its mean value, 11.83. For categorical predictors, `ggpredict()`

and `ggemmeans()`

behave differently. While `ggpredict()`

uses the reference level of each categorical predictor to hold it constant, `ggemmeans()`

- like `ggeffect()`

- averages over the proportions of the categories of factors.

```
library(sjmisc)
data(efc)
efc$e42dep <- to_label(efc$e42dep)
fit <- lm(barthtot ~ c12hour + neg_c_7 + e42dep, data = efc)
ggpredict(fit, terms = "c12hour")
#> # Predicted values of Total score BARTHEL INDEX
#>
#> c12hour | Predicted | 95% CI
#> ------------------------------------
#> 0 | 92.74 | [88.48, 97.00]
#> 20 | 91.32 | [87.07, 95.57]
#> 45 | 89.53 | [85.21, 93.86]
#> 65 | 88.10 | [83.65, 92.56]
#> 85 | 86.68 | [82.04, 91.32]
#> 105 | 85.25 | [80.38, 90.12]
#> 125 | 83.82 | [78.67, 88.97]
#> 170 | 80.61 | [74.72, 86.50]
#>
#> Adjusted for:
#> * neg_c_7 = 11.83
#> * e42dep = independent
ggemmeans(fit, terms = "c12hour")
#> # Predicted values of Total score BARTHEL INDEX
#>
#> c12hour | Predicted | 95% CI
#> ------------------------------------
#> 0 | 73.51 | [71.85, 75.18]
#> 20 | 72.09 | [70.65, 73.53]
#> 45 | 70.30 | [68.89, 71.71]
#> 65 | 68.87 | [67.29, 70.46]
#> 85 | 67.45 | [65.55, 69.34]
#> 105 | 66.02 | [63.74, 68.30]
#> 125 | 64.59 | [61.88, 67.31]
#> 170 | 61.38 | [57.61, 65.15]
#>
#> Adjusted for:
#> * neg_c_7 = 11.83
```

In this case, one would obtain the same results for `ggpredict()`

and `ggemmeans()`

again, if `condition`

is used to define specific levels at which variables, in our case the factor `e42dep`

, should be held constant.

```
ggpredict(fit, terms = "c12hour")
#> # Predicted values of Total score BARTHEL INDEX
#>
#> c12hour | Predicted | 95% CI
#> ------------------------------------
#> 0 | 92.74 | [88.48, 97.00]
#> 20 | 91.32 | [87.07, 95.57]
#> 45 | 89.53 | [85.21, 93.86]
#> 65 | 88.10 | [83.65, 92.56]
#> 85 | 86.68 | [82.04, 91.32]
#> 105 | 85.25 | [80.38, 90.12]
#> 125 | 83.82 | [78.67, 88.97]
#> 170 | 80.61 | [74.72, 86.50]
#>
#> Adjusted for:
#> * neg_c_7 = 11.83
#> * e42dep = independent
ggemmeans(fit, terms = "c12hour", condition = c(e42dep = "independent"))
#> # Predicted values of Total score BARTHEL INDEX
#>
#> c12hour | Predicted | 95% CI
#> ------------------------------------
#> 0 | 92.74 | [88.48, 97.01]
#> 20 | 91.32 | [87.06, 95.57]
#> 45 | 89.53 | [85.20, 93.87]
#> 65 | 88.10 | [83.64, 92.57]
#> 85 | 86.68 | [82.03, 91.32]
#> 105 | 85.25 | [80.37, 90.13]
#> 125 | 83.82 | [78.67, 88.98]
#> 170 | 80.61 | [74.71, 86.51]
#>
#> Adjusted for:
#> * neg_c_7 = 11.83
```

Creating plots is as simple as described in the vignette Plotting Marginal Effects.

**But when should I use ggemmeans() and when ggpredict()?**

When you are interested in the strength of association, it usually doesn’t matter. as you can see in the plots below. The slope of our focal term, `c12hour`

, is the same for all three plots:

```
library(see)
p1 <- plot(ggpredict(fit, terms = "c12hour"), ci = FALSE, show.title = FALSE, show.x.title = FALSE, show.y.title = FALSE)
p2 <- plot(ggemmeans(fit, terms = "c12hour"), ci = FALSE, show.title = FALSE, show.x.title = FALSE, show.y.title = FALSE)
p3 <- plot(ggemmeans(fit, terms = "c12hour", condition = c(e42dep = "independent")), ci = FALSE, show.title = FALSE, show.x.title = FALSE, show.y.title = FALSE)
plots(p1, p2, p3, n_rows = 1)
```

However, the predicted outcome varies. This gives an impression when `ggemmeans()`

, i.e. *marginal* effects, matter: when you want to predict your outcome, marginalized over the different levels of factors, i.e. “generalized” to the population (of your sample). `ggpredict()`

would give a predicted outcome for a *subgroup* of your sample, i.e. conditioned on specific levels of factors. Hence, the predicted outcome from `ggpredict()`

does not necessarily generalize to the “population” (always keeping in mind that we assume having a “representative sample” of a “population” as data in our model).

**But why should I use ggpredict() anymore?**

Some models are not yet supported by the **emmeans** package, thus, for certain models, only `ggpredict()`

works, not `ggemmeans()`

nor `ggeffect()`

. Sometimes, robust variance-covariance estimation is required for confidence intervals of predictions. In such cases, you have to rely on `ggpredict()`

. If you have no categorical predictors as non-focal terms (i.e. no factor needs to be held constant), then - as shown above - `ggpredict()`

and `ggemmeans()`

yield the same results.